VOLTCRAFT VC-539 Mode D'emploi page 35

c) Resistance / Diode test / Continuity test / Capacitance
Make sure that in all circuitry, circuitry components, components and other
objects under test no voltage is present. Risk of electric shock!
1. Use the mode switch (4) to select the measurement mode for resistance / diode test / continuity
/ capacitance.
2. Remove the safety caps from the L-shaped test lead jacks.
3. Connect the red test lead to the red test lead jack (7).
4. Connect the black test lead to the black test lead jack (8).
5. Repeatedly push the MODE button (9) to select the measurement mode for resistance, diode
test, continuity or capacitance. In the upper right-hand corner of the LC display (10), the
corresponding symbol:
- Ω for resistance
- for diode test
- continuity test
- F for capacity
Measuring resistance / diode test / continuity / capacitance
35