Technical Data; Additional Safety And Working Instructions - Milwaukee M18 Fbs127Do Instructions D’origine

1
2
24

TECHNICAL DATA

Type
Production code
Battery voltage
No-load speed
Blade size
Cutting capacity
Rectangular stock
Pipe
Radio-frequency power
Frequency band(s) of BLUETOOTH
BLUETOOTH version
Weight according to EPTA-Procedure 01/2014 (3.0–12.0 Ah)
Recommended ambient operating temperature
Recommended battery pack types
Recommended chargers
Recommended lanyard
Noise information: Measured values determined according to EN 62841.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Always wear ear protectors.
Vibration information: Total vibration values (vector sum in the three axes) determined according to EN 62841.
Vibration emission value a / Uncertainty K
h
Sawing of metal
Sawing of wood
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING! Read all safety warnings, instructions,
illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
BAND SAW SAFETY WARNINGS
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessories contacting a "live" wire
may make exposed metal parts of the power tool "live" and could
give the operator an electric shock.

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

DANGER! Keep hands away from the cutting area and the
blade. Keep your second hand on the auxiliary handle. If both hands
are holding the product, they cannot be cut by the blade.
M18 FBS127DO
Cordless Band Saw
5037 40 01 XXXXXX MJJJJ
18 V
0–168 m/min
1139.8 x 12.7 x 0.5 mm
127 x 127 mm
ø 127 mm
1.8 dBm
2402–2480 MHz
4.2 BT signal mode
5.9–6.8 kg
-18 – +50 °C
M18B..., M18HB..., M18 FB...
M12-18..., M1418C6
MILWAUKEE Energy absorbing
80 dB(A) / 3.0 dB(A)
88 dB(A) / 3.0 dB(A)
2 2
1.6 m/s / 1.5 m/s
2 2
1.2 m/s / 1.5 m/s
Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
The dust produced when using the product may be harmful to
health. Do not inhale the dust. Use a dust absorption system and
wear a suitable dust protection mask.
Wear ear protectors. Exposure to noise can cause hearing loss.
Remove the battery pack before starting any work on the product.
Do not use cracked or distorted blades with the product.
Never operate the product with damaged guards or without guards
in place. Operating the product without guards or with damaged
guards may result in injury.
Clamp the workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Always place the guide shoe on the workpiece when cutting.
Do not machine any materials that present a danger to health, such
as asbestos.
25