Setting The Time-Setting Options; Checking The Time Settings; Setting The Timer; Setting A Cooking Time - CONSTRUCTA CC4W91860 Notice D'utilisation

OSetting the time-setting
options
Y our appliance has various time-setting options. You
S e t t i n g t h e t i m e - s e t t i n g o p t i o n s
can use 0 to call up the menu and switch between the
individual functions. The symbols for the available
functions light up in the display and the function that
you just selected is highlighted. A small triangle lights
up next to the relevant symbol.
Time-setting option Use
Timer The timer functions like an egg timer. It runs
M
independently of the appliance when it is
heating and of other time-setting options and
does not affect the appliance.
Cooking time Once the set cooking time has elapsed, the
+
appliance automatically stops heating.
Time When no other function is running in the fore-
0
ground, the appliance shows you the time of
day in the display.
You can only call up the cooking time using the 0 field
after setting a type of heating. The timer can be set at
any time.
An audible signal sounds once the cooking time or
timer duration has elapsed. You can cancel the signal
early by touching the 0 field.
Note: You can change how long the audible signal
sounds for in the basic settings. ~ "Basic settings"
on page 53

Checking the time settings

If several time-setting options are set, the
corresponding symbols light up in the display. The
cooking time starts counting down.
To check the timer M, cooking time + or time 0, touch
0 repeatedly until the relevant symbol is highlighted.
During operation, only the timer and cooking time are
available. In standby, only the timer and time are
available. The value for this appears in the display for a
few seconds.

Setting the timer

You can use the timer as a kitchen timer. It runs
independently of the appliance. The timer has its own
audible signal. In this way, you can tell whether it is the
timer or a cooking time which has elapsed.
Touch 0 until the M symbol is highlighted.
1.
The M symbol and the time symbols light up on the
display.
Use the settings area to set the timer duration.
2.
After a few seconds, the timer setting is adopted. The
timer starts. The M symbol lights up on the display and
the timer counts down. The other time symbols go out.
The timer duration has elapsed
An audible signal sounds. ‹‹:‹‹ is shown in the
display. Touch any field to switch off the timer.

Setting the time-setting options

Changing the timer duration
Use the settings area to change the timer duration. After
a few seconds, the change is applied.
Cancelling the timer duration
Use the settings area to reset the timer duration to
‹‹:‹‹. After a few seconds, the change is applied. The
timer is switched off.

Setting a cooking time

You can set the cooking time for your food on the
appliance. Once the cooking time has elapsed, the
appliance will automatically switch itself off. The
cooking time cannot be accidentally exceeded.
Example in the picture: Grill heating function at setting
3, cooking time 45 minutes.
Touch the ! button.
1.
Use the settings area to set the heating function.
2.
Touch the °C/A button.
3.
Touch the 0 button until the + symbol and the
4.
cooking time are highlighted.
Note: A default value may be displayed, depending
on the heating function.
Use the settings area to set a cooking time of 45
5.
minutes.
Touch the IH button.
6.
The oven will start. The cooking time will count down on
the display and the IH LED will be lit.
The cooking time has elapsed
An audible signal sounds. The appliance stops heating.
‹‹:‹‹ is shown in the display.
Touch 0.
1.
The audible signal stops.
Touch #.
2.
The appliance is switched off.
Changing the cooking time
Touch 0 until the + symbol is highlighted.
1.
Use the settings area to change the cooking time.
2.
After a few seconds, the change is applied.
en
51