Cleaning The Cooking Compartment And Accessories; Operating The Appliance; Switching The Appliance On And Off - CONSTRUCTA CC4W91860 Notice D'utilisation

Operating the appliance

en
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed. One hour with Hot air ~ at 180 °C
is ideal for this. Ensure that no packaging remnants
have been left in the cooking compartment.
Touch !.
1.
The Hot air ~ type of heating is set as default.
Touch °C/A.
2.
Set to 180 ºC using the settings area.
3.
Touch IH.
4.
The appliance begins to heat up.
Switch off the oven after one hour. Touch # to do so.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
44
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.

Switching the appliance on and off

Before you are able to set the appliance, you must
switch it on.
Note: The childproof lock can only be set if the
appliance is switched off. Some displays also remain
visible in the display when the appliance has been
switched off.
Switch off your appliance when it is not being used. If
no settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Touch #.
A standard value is highlighted on the display. The
appliance is ready to use.
You can find out how to set the operating modes in the
individual chapters.
Switching off the appliance
Touch #.
Any functions that may be running are cancelled.
The time appears on the display.
Note: You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Operation
Some operating steps are the same for all operating
modes. In the following, you can learn about the basic
operating steps.
Starting the operation
Touch the IH field.
Your settings are shown in the display. If a cooking time
has been set, this counts down visibly.
Note: Opening the appliance door also pauses the
operation. Close the appliance door and touch the
IH field.
Pausing the operation
Touch the IH field or open the appliance door.
1.
The operation is suspended and the IH LED flashes.
Close the appliance door.
2.
Touch the IH field.
3.
The operation is continued and the IH LED lights up.