Getting To Know Your Appliance; Control Panel - CONSTRUCTA CC4W91860 Notice D'utilisation

Getting to know your appliance

en
*Getting to know your
appliance
I n this chapter, we will explain the indicators and
G e t t i n g t o k n o w y o u r a p p l i a n c e
controls. You will also find out about the various
functions of your appliance.
Note: Depending on the appliance model, individual
details and colours may differ.
( Display
The display shows symbols for active functions
and the time-setting options.
0 Touch fields
There are sensors behind the touch fields. Simply
touch a symbol to select the function.
8 Settings area
You can set the temperature for the type of
heating or select the setting for other functions
using the settings area.
40

Control panel

In the control panel, you can use the touch fields and
settings area to set the different appliance functions.
The current settings are shown on the display.
The overview shows the control panel when the
appliance is switched on with all symbols on the
display.
Touch fields and display
You can use the touch fields to set various additional
functions for your appliance. You can see the values for
these in the display.
Touch fields
Here you can find a short explanation of the various
buttons and touch fields.
Symbol
On/off
#
Microwave
!
Types of heating
!
Programmes
=
°C/A Temperature/
weight
Childproof lock
@
Rapid preheating Activates/deactivates rapid preheat-
d
Aquaclean
#
Time-setting
0
options
Start/stop
IH
--------
Meaning
Switches the appliance on or off
Select the microwave power levels or
switch on the microwave function for
a type of heating.
Highlights the types of heating. Set
the type of heating using the settings
area.
Highlights the programmes. Set the
programmes using the settings area.
Highlights the temperature/weight.
Set the temperature or weight using
the settings area.
Touch and hold to activate/deactivate
the childproof lock
ing
Activates the cleaning function
Select and set time-setting options
using the settings area.
Starts or pauses the operation
Note: Pressing and holding ends the
current operation and the settings for
the operating mode selected are reset
to the default values.