GE IM-6 Manuel D'utilisation Et D'installation page 31

6 POWER CORD ADAPTER
There are two power cord adapters included with the
kit; be sure to use the one specified in the Parts List
on page 7. Plug the female end of the power cord
adapter (20) onto the male terminals on the icemaker
power cord. When connecting the adapter to the
power cord, make sure the seal is in place between
the connectors. Secure the power cord adapter to
the icemaker by putting it into the hook at the back
of the icemaker and attaching it to the icemaker with
a wire tie (22).
Hook
INSTALL THE ICEMAKER FILL
7
CUP AND INSERT
Install the icemaker fill cup (center-mounted) (25)
and icemaker insert (26) into the icemaker as shown.
25
8
PLUG IN THE ICEMAKER
Holding the icemaker in place, insert the power
cord plug into the socket, making sure that the
prongs and holes are matched. Press the plug firmly
into the socket. Lock the plug in place by clipping
the restraints onto each side of the plug. Make sure
the restraints click into place.
Installation Instructions
20
Seal
Wire tie
Hook
26
MOUNT THE ICEMAKER
9
• Lift the icemaker up and hang it on the icemaker
bracket (28). Make sure the insulated fill tube (23)
goes into the fill cup (25) opening. To secure the
icemaker to the bracket (28), use two screws (24)
and install as shown.
Make sure:
• The power cord is still firmly in the socket.
• The insulated fill tube (23) extends into the fill
cup opening at the back of the icemaker. (Check
the rear of the refrigerator to make sure that the
fill tube has not
pushed out the
back of the
refrigerator).
• The icemaker
is secured to
the bracket.
10 INSTALL THE ICE BUCKET
Place the ice bucket (11) under the icemaker.
Make sure the icemaker power switch is set to O (off).
11
11
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date
of installation for warranty purposes. Apply it to the
back of the refrigerator.
12
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Installing the Water
Valve Assembly section.
31
23
28
25
24