Technical Data - REMS Tiger ANC Notice D'utilisation

eng
● Check the power cable of the electric al device and extension leads regularly
for damage. Have these renewed by qualified experts or an authorised REMS
customer service workshop in case of damage.
● Only use approved and appropriate marked extension leads with a sufficient
cable cross-section at least with the protection class approved in 1.5.
Electrical data. Use extension leads up to a length of 10 m with cable cross­
section 1.5 mm², from 10 – 30 m with cable cross­section 2.5 mm².
Explanation of symbols
WARNING
Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Use eye protection
Use a respirator
Use ear protection
Electrical device complies with protection class II
Environmentally friendly disposal
CE conformity mark
Force-transmitting
guide holder
90°
90°
Steel pipes
Metal
Stainless steel
Pallets
Wood
Wood with nails

1. Technical data

Use for the intended purpose
WARNING
REMS reciprocating saws are intended, using suitable saw blades, for sawing
different materials, e.g. steel pipes, stainless steel pipes, cast iron pipes, other metal
profiles, wood, wood with nails, pallets, building materials, plastics, also for plunge-
cut sawing in material that is not too hard.
All other uses are not for the intended purpose and are prohibited.
1.1. Scope of Supply
REMS Tiger ANC/VE/SR/pneumatic: Drive machine, Allen key, guide holder
up to 2", 2 REMS special saw blades up to 2"/140-3.2, sheet steel box, operating
instructions
REMS Puma VE: Drive machine, Allen key, 1 REMS saw blade 210-1.8/2.5,
sheet steel box, operating instructions
REMS Cat ANC VE: Drive machine, Allen key, 1 REMS universal saw blade
150-1.8/2.5, sheet steel box, operating instructions
REMS Akku-Cat ANC VE: Drive machine, battery, rapid charger, Allen key, 1
REMS universal saw blade 150-1.8/2.5, sheet steel box, operating instructions
1.2. Article numbers
REMS Tiger ANC drive unit
REMS Tiger ANC VE drive unit
REMS Tiger ANC SR drive unit
REMS Tiger ANC pneumatic drive unit
REMS Puma VE drive unit
REMS Cat ANC VE drive unit
REMS Akku-Cat ANC VE drive unit Li-Ion
Green wood
Breeze blocks
Plaster boards
Pumice, brick
Cast iron
corrugated
straight-set
straight
pellets
560000
560008
560001
560002
560003
560004
560009
Battery Li-Ion 18 V, 2,6 Ah
Battery Li-Ion 18 V, 3,5 Ah
Rapid-charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W
Guide holder / " – 2"
1
16
Guide holder 2½" – 4"
Guide holder 5" – 6"
Double holder
Protective cap for guide holder, for clamping thin-walled material
Steel case
REMS CleanM
1.3. Applications
Right-angled sawing with REMS Tiger ANC/VE/SR/pneumatic:
With guide holder 563000 and
REMS special saw blade 561001, 561007
Pipes (also plastic jacketed)
With guide holder 563100 and
REMS special saw blade 561002
Pipes (also plastic jacketed)
With guide holder 563200 and
REMS special saw blade 561008
Pipes (also plastic jacketed)
REMS Tiger ANC SR with guide holder
and REMS universal saw blade 561005, 561003
Stainless steel pipes
Hand-guided sawing with all REMS reciprocating saws
REMS universal saw blades and REMS saw blades
Steel pipes and other metal profiles,
Wood, wood with nails, pallets,
building materials, plastics
1.4. Number of strokes (idling speed)
REMS Tiger ANC
REMS Tiger ANC VE (infinitely variable)
REMS Tiger ANC SR (infinitely variable)
REMS Tiger ANC 48 V
REMS Tiger ANC pneumatic (infinitely variable)
REMS Puma VE (infinitely variable)
REMS Cat ANC VE (infinitely variable)
REMS Akku-Cat ANC VE (infinitely variable)
1.5. Electric data
REMS Tiger ANC/VE,
REMS Cat ANC VE 230 V; 50 – 60 Hz; 1050 W; 5 A or
110 V; 50 – 60 Hz; 1050 W; 10 A or
48 V; 750 W; 16.5 A
radio interference suppression
Protection class ll, protective insulation
REMS Tiger ANC SR 230 V; 50 – 60 Hz; 1400 W; 6.4 A or
110 V; 50 – 60 Hz; 1400 W; 12.8 A
radio interference suppression
Protection class ll, protective insulation
REMS Puma VE 230 V; 50 – 60 Hz; 1300 W; 6 A
radio interference suppression
Protection class ll, protective insulation
REMS Akku-Cat ANC VE 18 V=; 30 A
Rapid-charger Input
Li-Ion/Ni-Cd Output
1.6. Compressed-air supply REMS Tiger ANC pneumatic
Required working pressure
Air consumption at idling speed
Air consumption at full speed
Tube width
Oiler adjustment
1.7. Dimensions
REMS Tiger ANC
REMS Tiger ANC VE
REMS Tiger ANC SR
REMS Tiger ANC pneumatic
REMS Puma VE
REMS Cat ANC VE
REMS Akku-Cat ANC VE
1.8. Weights
REMS Tiger ANC
REMS Tiger ANC VE
REMS Tiger ANC SR
REMS Tiger ANC pneumatic
REMS Puma VE
REMS Cat ANC VE
REMS Akku-Cat ANC VE (with battery)
REMS Battery Li-Ion 18 V, 2,6 Ah
REMS Battery Li-Ion 18 V, 3,5 Ah
Guide support / " – 2"
1
16
eng
565215
565218
571560
563000
563100
563200
543100
563008
566051
140119
/ " – 2"
1
16
2½" – 4"
5" – 6"
/ " – 2" or 2½" – 4"
1
16
Ø ≤ 6", ≤ 250 mm
≤ 250 mm
2400 min‫¹־‬
0 ... 2400 min‫¹־‬
700 ... 2200 min‫¹־‬
1300 min‫¹־‬
0 ... 1700 min‫¹־‬
0 ... 2800 min‫¹־‬
0 ... 2400 min‫¹־‬
0 ... 1800 min‫¹־‬
230 V~; 50 – 60 Hz; 65 W
10.8 – 18 V=
0.6 MPa, 6 bar (85 psi)
1.6 m³/min (56 cf/min)
1.3 m³/min (46 cf/min)
12 – 13 mm (½")
6 – 7 drops/min
455×80× 90 mm (17.9"×3.2"×3.5")
435×80×135 mm (17.1"×3.2"×5.3")
490×80× 90 mm (19.3"×3.2"×3.5")
445×80× 90 mm (17.5"×3.2"×3.5")
475×90×152 mm (18.7"×3.5"×6.0")
435×80×135 mm (17.1"×3.2"×5.3")
435×90×190 mm (17.1"×3.5"×7.5")
3.0 kg (6.6 lb)
3.0 kg (6.6 lb)
3.1 kg (6.8 lb)
3.8 kg (8.4 lb)
3.8 kg (8.4 lb)
3.0 kg (6.6 lb)
3.5 kg (7.7 lb)
0.6 kg (2.2 lb)
0.6 kg (2.2 lb)
1,0 kg (2,2 lb)