Publicité
LIGHT
SMART CLEAN
PYRO SELF CLEANING
Please note: Pyrolytic cycle can also be activated when
the tank is filled with water.
Once the cycle has been selected, it is possible to delay
the start of the automatic cleaning. Tap on "DELAY" to
set the end time as indicated in the relative paragraph.
DESCALE
*considering the default value (4 - Hard) of water
hardness level. The number of hours of steam cycles
that must pass before the Decale messages are shown
depends on the water hardness level set on the
appliance.
Please note: to ensure that the water is cold, it is not
possible to perform this activity before 30 minutes have
elapsed from the last cycle (or the last time the product
was powered). During this waiting time, the display will
show the following feedback "WATER IS HOT".
PHASE 1/2: DESCALING (70 MIN)
Publicité
