Adjusting Trimmer For User; Adjusting And Setting The Loop Handle; Removing And Fitting The Battery - Stihl Fsa 70.0 R Notice D'emploi

English
7.3 Mounting and Removing the
Mowing Head
7.3.1 Attaching the mowing head
► Switch off the brushcutter and remove the bat‐
tery.
1 2
3
4
► If the release button (1) is not pressed: Press
the release button (1) until it engages.
► Push the mowing head (4) onto the shaft (3)
and press it against the fanwheel (2).
The mowing head engages with a click.
The release button pops out, and the mowing
head fits flush against the fanwheel.
► If the mowing head does not engage: Press
the mowing head against the fanwheel and
rotate it until it engages.
7.3.2 Removing the mowing head
► Switch off the brushcutter and remove the bat‐
tery.
► Hold the mowing head firmly with one hand.
► With the other hand, press the release button
until it engages.
The mowing head pops up from the shaft and
can be removed.
8

Adjusting Trimmer for User

8.1 Adjusting and setting the loop
handle
The loop handle can be set to different positions
to suit the height and reach of the user.
► Switch off the brushcutter and remove the bat‐
tery.
3
► Release the quick release clamp (2).
38
a
1
2
8 Adjusting Trimmer for User
► Move the loop handle (1) to the required posi‐
tion and check that the following conditions
are met:
– The bump guard (3) fits between the loop
handle (1) and the control handle.
– The distance (a) of no more than 30 cm is
not exceeded.
► Close the quick release clamp (2) so that the
loop handle (1) cannot be rotated on the shaft
any longer.
9 Removing and Fitting the
Battery
9.1 Fitting the Battery
2
1
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
Arrows (3) on battery (1) are still visible and
battery (1) is held securely in battery compart‐
ment (2). There is no electrical contact
between the trimmer and battery (1).
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and is flush with the trimmer's housing.
9.2 Removing the battery
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
2
► Press and hold the locking lever (1) with your
other hand.
The battery (2) is now unlocked and can be
removed.
3
1
0458-063-9601-A