Adjusting Trimmer For User - Stihl FSA 45 Notice D'emploi

English
► Ease the ends of the loop handle (2) apart and
push it onto the control handle until it engages
in position.
► Insert the screw (3) through the hole.
► Fit the star knob nut (1) and tighten it down.
The loop handle (2) must not be removed again.
8

Adjusting Trimmer for User

8.1 Adjusting Shaft Angle
The shaft angle can be adjusted to suit the
height and reach of the user.
► Switch off the trimmer and remove the activa‐
tion key.
B
C
D
► Depress the lever (1) and hold it in that posi‐
tion.
► Move shaft (2) to the required position (A to D)
until it engages.
► Release the lever (1).
8.2 Adjusting Length of Shaft
The length of the shaft can be adjusted to suit
the height and reach of the user.
► Switch off the trimmer and remove the activa‐
tion key.
► Hold the shaft firmly.
1
► Depress lock button (1) and hold it in that posi‐
tion.
► Pull or push the control handle (2) to the
required position.
► Release the lock button (1).
► Move the control handle (2) back and forth
until it engages.
30
A
2
1
2
8 Adjusting Trimmer for User
8.3 Adjusting the Loop Handle
The loop handle can be set in different positions
to suit the height and reach of the user.
► Switch off the trimmer and remove the activa‐
tion key.
1
► Loosen the star knob nut (1).
► Tilt the loop handle (2) to the required position.
► Tighten down the star knob nut (1) firmly.
8.4 Converting Trimmer to Edger
► Switch off the trimmer and remove the activa‐
tion key.
1
2
► Depress lock button (1) and hold it in that posi‐
tion.
► Rotate control handle (2) 90° until it engages.
► Release the lock button (1).
► Depress the lever (4) and hold it in that posi‐
tion.
► Swing the shaft (2) to the flattest position until
it engages.
► Release the lever (4).
► Extend the bump guard (5) fully.
2
3
4
0458-718-9621-B