Toro Flex-Force Power System 60V MAX Mode D'emploi page 34

Masquer les pouces Voir aussi pour Flex-Force Power System 60V MAX:
Table des Matières
Replacing the Trimmer Head
1.
Remove the battery pack from the trimmer.
2.
Insert a small-diameter tool (such as a screwdriver) through the
motor housing and into the groove in the fan to secure the trimmer
head so it does not freely rotate
Note:
With the tool inserted in the hole, rotate the trimmer head until
you feel the rod fall into the groove.
(Figure
17).
Figure 17
32
g512077
Table des Matières
loading

Ce manuel est également adapté pour:

5183851838t

Table des Matières