Starting The Trimmer - Toro Flex-Force Power System 60V Max Mode D'emploi

Operation

Starting the Trimmer

1. Ensure that the vents on the trimmer are clear of any dust and debris.
2. Align the cavity in the battery pack with the tongue on the power
head (Figure
3. Push the battery pack into the power head until the battery locks
into the latch
1. Battery latch
4. To start the trimmer, pull back the lockout switch, then squeeze the
variable-speed trigger
Note:
Slide the speed range switch to change the speed of the
trimmer.
1. Speed range switch
2. Lockout switch
7).
(Figure 7).
Figure 7
(Figure
Figure 8
8).
3. Variable-speed trigger
21
g507688
g507689