Toro Flex-Force Power System 60V MAX Mode D'emploi page 19

2
Installing the Auxiliary Handle
Parts needed for this procedure:
1 Auxiliary handle assembly
Procedure
1. Separate the auxiliary handle from the handle bracket by unscrewing
the handle-lock knob and removing the bolt (A of
Important:
handle; lightly tap the bottom of the bolt until it is free from
the handle.
2. Align the handle bracket with the auxiliary handle (B of
3. Slide the handle bracket into the slot on the auxiliary handle (C of
Figure 4).
4. Secure the lower handle bracket to the auxiliary handle with the
handle-lock knob and the previously removed bolt (D of
The bolt may be wedged into the plastic of the
Figure 4
17
Figure 4).
Figure 4).
Figure 4).
g507673