Toro Flex-Force Power System 60V MAX Mode D'emploi page 12

metal parts of the machine "live" and could give the operator an
electric shock.
14. Always keep proper footing and operate the machine only when
standing on the ground. Slippery or unstable surfaces may cause
a loss of balance or control of the machine.
15. Do not operate the machine on excessively steep slopes. This
reduces the risk of loss of control, slipping and falling which may
result in personal injury.
16. When working on slopes, always be sure of your footing,
always work across the face of slopes, never up or down and
exercise extreme caution when changing direction. This reduces
the risk of loss of control, slipping and falling which may result in
personal injury.
17. Keep all parts of the body away from the cutter, line or blade
when the machine is operating. Before you start the machine,
make sure the cutter, line or blade is not contacting anything.
A moment of inattention while operating the machine may result in
injury to yourself or others.
18. Do not operate the machine above waist height. This helps
prevent unintended cutter or blade contact and enables better control
of the machine in unexpected situations.
19. When cutting brush or saplings that are under tension, be
alert for spring back. When the tension in the wood fibers is
released, the brush or sapling may strike the operator and/or throw
the machine out of control.
20. Use extreme caution when cutting brush and saplings. The
slender material may catch the blade and be whipped toward you or
pull you off balance.
21. Maintain control of the machine and do not touch cutters, lines
or blades and other hazardous moving parts while they are still
in motion. This reduces the risk of injury from moving parts.
22. Carry the machine with the machine switched off and away from
your body. Proper handling of the machine will reduce the likelihood
of accidental contact with a moving trimmer cutter, line or blade.
23. Only use replacement cutters, lines, cutting heads and blades
specified by the manufacturer. Incorrect replacement parts may
increase the risk of breakage and injury.
SAVE THESE
INSTRUCTIONS
10