Toro Flex-Force Power System 60V MAX Mode D'emploi page 27

Using the Shoulder Harness
Important:
If you are using the string trimmer with a 8.0 Ah or greater
battery pack installed, install a shoulder harness (not included).
Do not use the shoulder harness if you are powering the string
trimmer with the backpack and backpack tether; use only the
backpack harness.
Connect the clip on the shoulder harness to the attachment eye on top
of the handle (Figure
1. Strap adjuster
2. Pivot clip
3. Attachment eye
The strap length is adjustable; slide the strap adjuster up to decrease the
length of the strap, or down to increase the length of the strap
If there you ever need to rapidly remove the harness, disconnect the
quick-release buckle as follows:
1. Press in on the sides of the buckle (A of
12).
Figure 12
25
4. Shoulder pad
5. Quick-release buckle
Figure
(Figure
13).
g507529
12).