Transport And Installation; Ambient Temperature - Abicor Binzel xFUME FLEX Mode D'emploi

5 Transport and installation

Tab. 2

Ambient temperature

(operation, storage in a closed
environment)
Ambient temperature (transport)
Relative humidity
5 Transport and installation
Risk of injury due to improper transport and installation
Improper transport and installation can cause the device to tip or fall over. This may result in serious
injuries.
► Check and wear your personal protective equipment.
► Ensure that all supply lines and cables do not encroach into the area in which employees are working.
► Place the device on a suitable base (flat, solid, dry) on which it will not topple over.
► Note the weight of the device when lifting it.
► Use an appropriate lifting tool with load handling attachment for transporting and installing the
► Transport the device only by the handle.
► Avoid abrupt lifting and setting down.
► Do not lift the device over persons or other devices.
Risk of injury due to moving extraction arm
If the extraction arm is protruding when the device is moved, it could cause injury to people standing
nearby.
► The device should be moved only when the extraction arm is upright.
NOTICE
Material damage due to device tipping over
If the extraction arm is protruding when the device is moved, it could cause the device to tip over.
► The device should be moved only when the extraction arm is upright.
NOTICE
Risk of material damage due to improper transport and installation
Improper transport or installation can cause the device to tip or fall over. This can result in material
damage and irreparable damage to the device.
► Protect the device against weather conditions, such as rain and direct sunlight.
► Ensure that the device does not make contact if you pass over edging.
► Use the device only in dry, clean and well-ventilated rooms.
► Maintain a minimum distance of 1 m from the wall when installing the device to ensure that the device
► Install the device and lock the castors.
EN - 10
Ambient conditions for transport, storage and operation
WARNING
 4.2 Technical data on page EN-10
device.
CAUTION
has sufficient ventilation.
xFUME FLEX
0°C to +40°C
−15°C to +40°C
Up to 90 % at +20°C