Transport And Installation - Abicor Binzel xFUME ADVANCED Mode D'emploi

®
xFUME ADVANCED
Tab. 2
Ambient temperature
(operation, storage in a closed
environment)
Ambient temperature (transport)
Relative humidity

5 Transport and installation

W
Risk of injury due to improper transport and installation
Improper transport and installation can cause the device to tip or fall over. This may result in serious
injuries.
► Check and wear your personal protective equipment.
► Ensure that the extraction hose is laid in a straight line.
► Ensure that all supply lines and cables do not encroach into the area in which employees are working.
► Place the device on a suitable base (flat, solid, dry) on which it will not topple over.
► Note the weight of the device when lifting it.
► Use an appropriate lifting tool with load handling attachment for transporting and installing
► Avoid abrupt lifting and setting down.
► Do not lift the device over persons or other devices.
NOTICE
Risk of material damage due to improper transport and installation
Improper transport or installation can cause the device to tip or fall over. This can result in material
damage and irreparable damage to the device.
► Protect the device against weather conditions, such as rain and direct sunlight.
► Ensure that the device does not make contact if you pass over edging.
► Use the device only in dry, clean and well-ventilated rooms.
► Maintain a minimum distance of 1 m from the wall when installing the device to ensure that the device
From June 2021
Ambient conditions for transport, storage and operation
WARNING
 4.3 Technical data on page EN-10
the device.
has sufficient ventilation.
5 Transport and installation
0 °C to +40 °C
−15 °C to +40 °C
Up to 90% at +20 °C
Install the lower part of the device including
1
collection container in an appropriate place.
Lock the castors.
2
Place the upper part of the device on the lower
3
part and secure with clamps on both sides.
EN - 11