Product-Specific Safety Instructions - Abicor Binzel xFUME ADVANCED Mode D'emploi

Masquer les pouces Voir aussi pour xFUME ADVANCED:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

®
xFUME
ADVANCED
Safety instructions for electrical components
► Check electric tools for damage and for its proper functioning in accordance with its designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
Safety instructions for welding
► Arc welding may cause damage to the eyes, skin and hearing. Note that other hazards may arise when
the device is used with other welding components. Therefore, always wear the prescribed personal
protective equipment as defined by local regulations.
► Any metal vapors, especially lead, cadmium, copper and beryllium are harmful. Ensure sufficient
ventilation or extraction. Do not exceed the current threshold limit values (TLV).
► To prevent the formation of phosgene gas, rinse workpieces that have been degreased with chlorinated
solvents using clean water. Do not place degreasing baths containing chlorine in the vicinity of the
welding area.
► Adhere to the general fire protection regulations and remove flammable materials from the vicinity of
the welding work area prior to starting work. Provide appropriate fire extinguishing equipment in the
workplace.
Safety instructions for personal protective equipment
► Do not wear loose fitting clothing or jewelry.
► Use a hair net for long hair.
► Wear safety goggles, protective gloves, and a respiratory mask, if necessary.

2.5 Product-specific safety instructions

W
Health risk caused by inhaling harmful dust
The device contains harmful dust that can collect on surfaces and penetrate the ambient air as of the first
use. It can damage the respiratory tract when inhaled.
► Check and wear your personal protective equipment.
► Use the device only in rooms with sufficient ventilation.
► Ensure that all seals on the device are free from dirt and debris.
► The provided filtration system must be used when operating the device.
► The dust collecting drawer must be closed when operating the device.
► Keep the device closed during operation and during the cleaning process.
► Immediately remove dust deposits from the environment with a dust class H industrial vacuum cleaner
W
Fire and explosion hazard due to usage not in accordance with the designated use
The extraction of flammable, aggressive chemical or oil-laden substances and materials as well as dusts
containing aluminum or magnesium can pose a risk of fire and explosion due to chemical reactions.
This may result in serious injuries.
► Use the device according to its designated use only.
NOTICE
Material damage due to fire or explosion
The extraction of flammable, aggressive chemical or oil-laden substances and materials, as well as dusts
containing aluminum or magnesium, can pose a risk of fire and explosion. This can result in irreparable
damage to the device.
► Use the device according to its designated use only.
From June 2021
WARNING
or a damp cloth.
WARNING
2 Safety
EN - 7

Publicité

Table des Matières
loading

Table des Matières