Fueling; Starting / Stopping The Engine - Stihl FS 38 Notice D'emploi

Masquer les pouces Voir aussi pour FS 38:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Take care when handling gasoline.
Avoid direct contact with the skin and
avoid inhaling fuel vapour.
The canister should be kept tightly
closed in order to avoid any moisture
getting into the mixture.
The fuel tank and the canister in which
fuel mix is stored should be cleaned
from time to time.
Fuel mix ratio
Only mix sufficient fuel for a few days
work, not to exceed 3 months of storage.
Store in approved safety fuel-canisters
only. When mixing, pour oil into the
canister first, and then add gasoline.
Examples
Gasoline
Oil (STIHL 50:1 or
equivalent high-quality
oils)
liters
liters
1
0.02
5
0.10
10
0.20
15
0.30
20
0.40
25
0.50
Dispose of empty mixing-oil canisters
only at authorized disposal locations.
FS 38

Fueling

Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
(ml)
(20)
After fueling, tighten fuel cap as
securely as possible by hand.
(100)
(200)
(300)
(400)
(500)
Starting / Stopping the
Engine
3
1 2
5
7 6
Controls
Stop switch (1) with positions:
I – normal run position (2) and
O – stop (3)
Throttle trigger lock (4)
Throttle trigger (5) with tongue (6) and
notched lug (7).
English
4
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières