Stihl FS 38 Notice D'emploi page 36

Definitions
1. Loop handle
For easy control of machine during
cutting work.
2. Handle hose
For holding the machine during
engine starts and cutting work.
3. Stop switch
Switches the engine's ignition
system off and stops the running
engine.
4. Throttle trigger interlock
Must be depressed before the
throttle trigger can be activated.
5. Throttle trigger
Controls the speed of the engine.
6. Choke lever
Eases engine starting by enriching
mixture.
7. Air filter cover
Covers the air filter element.
FS 38
8. Fuel filler cap
For closing the fuel tank.
9. Fuel tank
For fuel and oil mixture.
10. Machine support
For resting machine on the ground.
11. Fuel pump
Provides additional fuel feed for a
cold start.
12. Carburetor adjusting screw
For tuning carburetor.
13. Starter grip
The grip of the pull starter, which is
the device to start the engine.
14. Spark plug boot
Connects the spark plug to the
ignition wire.
15. Muffler (with spark arresting
screen in some markets)
Attenuates exhaust noises and
diverts exhaust gases away from
operator.
16. Line limiting blade
Metal blade on the skirt which keeps
the line of the mowing head at the
proper length.
17. Deflector
The deflector is designed to reduce
the risk of injury from foreign
objects flung backwards toward the
operator by the cutting tool and from
contact with the cutting tool. It is not
designed to contain fragmented
metal blades.
18. Mowing head
The nylon line mowing head for a
variety of applications.
19. Drive tube
Device to connect the engine with
the gearbox.
Metal cutting blades may not be
used on mchines with a curved drive
tube.
English
35