Approved Power Tool Attachments; Mounting The Bike Handle - Stihl FS 130 Notice D'emploi

English
Approved Power Tool
Attachments
HL 0-90° HL 135°
STIHL power tool attachments are
available for converting the single
purpose FS unit into other power tool
combinations.
20
Your brushcutter is therefore the basic
power unit for a number of different
attachments with a broad range of
applications.
Attachment Application
1)
BF Cultivator
2)3)
FCS Power Edger
1)
FH Power Scythe
2)
HL 0° Hedge Trimmer
1)2)
HL 30° Hedge Trimmer
1)2)
HL 0-90° Hedge Trimmer
(adjustable)
1)2)
HL 135° Hedge Trimmer
(adjustable)
2)
HT Pole Pruner
2)
KB (4601) Bristle Brush
2)
KW (4601) PowerSweep
2)
KW (4602) PowerSweep
1)
Barrier bar must be fitted on the
loop handle
2)
Not approved for use with bike-
handled units
3)
It is not necessary to use a shoulder
strap

Mounting the Bike Handle

2
6
1
Removing Clamp Moldings
: Hold the lower clamp (1) and upper
clamp (2) firmly.
: Release the wing screw (3).
The clamps are loose once the wing
screw has been released. They are
pushed apart by the two springs (4
and 5).
: Pull out the wing screw.
: Take the washer (6) out of the upper
clamp.
: Separate the clamps.
Springs (4) and (5) remain in the
lower clamp.
FS 130, FS 130 R
3
4
5