Inspection And Maintenance - Invacare Matrx Elite Back Manuel D'utilisation

3.0 M E B
ATRX LITE
IMPORTANT! Installation and set-up of your Matrx
performed by a Qualified Technician and/or Healthcare Provider.
®
The Matrx Elite back is contoured to provide precise orientation within the wheelchair
for optimal postural support. The foam is oversized to provide extra comfort and
®
protection. All Matrx Elite backs include an optional lumbar support pad that can be
installed/inserted behind the molded foam cushion to provide additional positioning
capability.
®
The Matrx Elite outer cover is made of a moisture resistant/breathable polyester mesh
(Meshtex™) fabric. Regular cleaning and inspection of the outer cover is recommended.
Refer to 4.0 - Care and Maintenance
M :
ODELS
PBE = E B (
LITE ACK STANDARD
EDB = E D B
LITE EEP ACK
PBE-TR = E T /R
LITE ILT ECLINE
M H :
OUNTING ARDWARE
The Matrx Elite Back comes standard with our removable EasySet Mounting Hardware
(PBMH). Additional hardware options (Fixed Hardware (FSSH), Extended Range Hardware
(ERMH) and Split Mounting Hardware (SMH)) are available at the time of order.
The Matrx Elite Back has been designed to install onto wheelchair back canes that are
up to 1" (25mm) wider or 1" (25mm) narrower than the nominal back width.
C D :
ONTOUR EPTH
• PBE, PBE-TR, PBE-HD, PBE-TRHD = 3" (76 mm)
• EDB, EDB-HD = 6" (152 mm)
W C :
EIGHT APACITY
• PBE, EDB, PBE-TR = 300 lb (136 kg)
• PBE-HD, EDB-HD, PBE-TRHD = 500 lb (227 kg)
4.0 C M
ARE AND AINTENANCE
Frequent visual inspection should be performed on all components, including upholstery,
foam, hardware/fasteners and any plastic components.

4.1 INSPECTION AND MAINTENANCE

W WARNING! Risk of injury or damage
• Do not continue to use this product if problems or damage are discovered;
• Corrective maintenance can be performed at or arranged through your service provider
Weekly: Inspect ALL fasteners weekly to ensure that mechanical connections and
attaching hardware are tightened securely.
Monthly: Perform a visual inspection of parts including hardware, brackets, upholstery
materials, foam, and plastics for deformation, corrosion, breakage, wear or compression.
Replace damaged/worn components if necessary.
O
ACK VERVIEW
) PBE-HD = E
LITE
EDB-HD = E
LITE
B PBE-TRHD = E
ACK
- 6 -
®
Elite Back MUST be
H -D B
EAVY UTY ACK
D H -D B
EEP EAVY UTY ACK
T /R . H D B
LITE ILT ECL EAVY UTY ACK