Hach MET ONE 3411 Manuel D'utilisation page 6

Supporting test records reside with the manufacturer. The device
complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
1. The equipment may not cause harmful interference.
2. The equipment must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this equipment not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment. This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be
required to correct the interference at their expense. The following
techniques can be used to reduce interference problems:
1. Disconnect the equipment from its power source to verify that it is or
is not the source of the interference.
2. If the equipment is connected to the same outlet as the device
experiencing interference, connect the equipment to a different
outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the
interference.
5. Try combinations of the above.
Wi-Fi devices
N O T I C E
Network and access point security is the responsibility of the customer that uses
the wireless instrument. The manufacturer will not be liable for any indirect,
special, incidental or consequential damages caused by a breach in network
security.
6 English
Country-specific approval for Wi-Fi devices
C A U T I O N
Electromagnetic radiation hazard. Make sure that the antenna is kept at
a minimum distance of 20 cm (7.9 in.) from all personnel in normal use.
The antenna cannot be co-located or operated in conjunction with any
other antenna or transmitters.
Products with the wireless option contain a modular RF Wi-Fi device that
operates in the 2.4 GHz range.
• United States FCC ID: R68WIPORTG
• Canada IC ID: 3867A-WIPORTG
Country
Austria
Belgium
Denmark
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Mexico
Poland
Portugal
Spain
Sweden
United Kingdom
ISO31662 letter code
AT
BA
DK
FI
FR
DE
GR
HU
IE
IT
MX
PL
PT
ES
SE
GB