Publicité
Les langues disponibles
Les langues disponibles
Step 6: Mount the payment box
•
When mounting on the stand accessory, apply thread
lock (M2) to the screws (P16).
•
Mount the bracket (P2) using screws (P5 or P16) and
screwdriver (T10). Ensure that the bracket is level, using
the spirit level (T12).
•
Hang the Payment Box on the bracket and fixate the
bottom two screws (P5 or P16) using screwdriver (T10).
•
Open the service door, using the master key.
Attention: The master key is not delivered alongside
the product and must be ordered separately. See
information
for more details.
•
Unscrew the cable cover parts using the adjustable
wrench (T9).
Step 7: Insert cabling
•
Remove the electrical safety barrier by unscrewing the
four screws in each corner by hand.
31.
www.ecotap.nl
ordering
25-02-25
Publicité
