Assembling The Holder; Changing The Soldering Tip - Parkside Plsa 20 Li B2 Instructions D'utilisation Et Consignes De Sécurité

During work over an extended period in which hazardous
vapours can be created, always ensure sufficient ventilation of the
workplace . In addition, protective gloves, a face mask and work
apron are recommended .
Avoid eating, drinking and smoking in rooms where soldering
work is taking place . Otherwise, lead residues on your hands
might contaminate the food, drink or cigarettes and be absorbed
into your body .
Always wash your hands thoroughly after soldering .
Do not dispose of solder waste in normal household waste! Solder
waste should be disposed of with hazardous waste .
The product is suitable for indoor use only .
Have the product repaired by the Lidl customer service centre or
a qualified electrician, using only genuine replacement parts . This
will ensure that the safety of the product is maintained .
˜ Before use
˜ Assembling the holder
Assemble the holder
o
˜ Changing the soldering tip
m CAUTION! Risk of burns!
Never heat the soldering iron
u
Switch off the product and let the soldering tip
u
before you remove the soldering tip .
1 . Loosen and remove the retaining nut
2 . Pull the fixing sleeve
36 GB/IE
on the soldering station (Fig . D) .
3 ] [
without a soldering tip
1 ] [
9 ] [
off the soldering iron
10 ] [
cool down
11 ] [
.
.
1 ] [
.
11 ] [