Residual Risks - Parkside Plsa 20 Li B2 Instructions D'utilisation Et Consignes De Sécurité

Customers can obtain compatible replacement
batteries and chargers from the LIDL online shop
www .lidl .de .
˜ Residual risks
m CAUTION! RISK OF BURNS! Do not touch the heated
soldering tip or the molten solder . There is a risk of being burnt .
Always allow the product to cool down completely before
changing, cleaning or checking components .
After work, allow the soldering iron to cool down in the air only .
Do not attempt to quench it with water!
m CAUTION! RISK OF FIRE! Always use the special holder or
another fireproof surface when you put the soldering iron down .
During breaks from work, the soldering iron must be placed into
the holder .
Keep the product away from flammable material .
Never leave a switched-on product unsupervised .
m CAUTION! RISK OF INJURY! Keep your hands away from
the heated workpiece . The heat can be emitted through the
workpiece .
Avoid contact between the hot soldering tip and the plastic parts
of the holder . Otherwise, the product might be damaged .
In case of hazards, remove the battery pack from the product
immediately .
CAUTION! RISK OF POISONING! Do not breathe in
m
vapours .
GB/IE 35