EN
b3- Slightly rotate the duct
(32) towards the right
and insert it in the motor
unit (1) graft facilitating
the correct coupling.
b4- Turn the channel (32) to
the left until the insertion
tube is vertical.
Make sure that the components are firmly stable; the duct (32) must not
move or disconnect from its position.
b5- Insert the tray (31) in the duct (32).
b6- Place the minced meat collection container under the final part of the refuelling
duct (32).
b7- Make sure that the switch (24) is in "0" position (Off ).
b8- Connect the power plug to the power socket making sure that the mains voltage
corresponds to the one indicate on the appliance data label.
b9- Start the appliance at minimum speed, then increased it if necessary (recommend-
ed speed: "6").
b10- Insert the food to be processed in the tray (31) and press it in the duct (32) with the
appropriate tamper.
☞
Do not insert fingers, tools and metallic objects in the refuelling
duct (32) to press foods. Use only the tamper.
Do not let the appliance work continuously for more than 3
minutes. Alternate functioning periods and breaks of at least 20
minutes.
138
USE AS MEAT GRINDER
32
SMX 6208
32