EN
•
Make sure that you have perfectly
hooked the splash protection cov-
er (22) in its correct position.
☞
Warning: the splash
protection cover (22)
m u s t b e h o o k e d
correctly.
The compartment (x) for
the splash protection cover
(22) ingredients placement
must be like it's shown in
the picture.
•
Insert the desired accessory in its appropriate position, slightly pushing it upwards
and turning it so that the bayonet coupling gets stuck and firmly blocks the accesso-
ry.
☞
Do not use the appliance without the splash protection cover (22).
•• Pour the ingredients in the bowl (18).
Do not exceed the maximum quantity of 8 Lt.
•
Keep the safety lever pressed (10) and move it towards the arrow direction, lower the
upper part (16) in operativeness position, horizontally.
•
Make sure that the switch (24) is in position "0" (Off ).
•
Connect the power plug to the outlet making sure that the mains voltage corresponds
to the one indicated on the appliance data plate.
•
Start the appliance at minimum speed (to avoid splashes), then increase it as needed.
•
For the pulse functioning use the "PULSE" function (brief time intervals mixing).
Do not insert fingers or tools inside the bowl (18) during
processing.
122
USE AS MIXER
22
22
x
x
SMX 6208
4
5
3
6
2
7
1
0
P