ohmex SMX 6208 Manuel D'utilisation page 115

SMX 6208
- never leave the appliance outdoors where it can be exposed to the
weather conditions (rain, such, etc.);
- never let children or disabled persons use the appliance unattended.
• Turn off the appliance and do not tamper with it in any way if it becomes faulty
and/or operates in an incorrect way. Repairs must only be carried out by a customer
service centre authorized by the manufacturer. Always insist on genuine spare parts.
Failure to comply with this recommendation could impair the safety of the
appliance.
• Should you decide to stop using an appliance of this type, remember to render it
unusable by cutting off the power cable after having removed the plug from the
power socket.
Also make sure that all parts of the appliance liable to constitute a danger are made
harmless, particularly for children who could decide to use an old appliance as a toy.
☞
The installation must be carried out following the manufacturer
instructions. A wrong installation could cause damages to people, animals
or things, for which the manufacturer cannot be considered liable.
• To avoid dangerous overheatings, to straighten the whole power cord is
recommended.
• To avoid overheating, the appliance must not be kept in continuous operation for
more than ........
....... 2 ÷ 6 minutes, as a mixer
....... 1 minute, as robot or blender
....... 3 minutes, like mincer
....... 30 seconds, as a coffee grinder
....... 3 minutes, as a juicer
Having to carry out work in succession or with longer times, take breaks of at least
20 minutes between cycles, reducing the continuous operating time.
• Do not leave the appliance unnecessarily inserted. Disconnect the plug from the
mains power supply when the appliance is not used.
• Do not obstruct the ventilation and heat elimination openings or fissures.
• If the power cord of this appliance is damaged, it must be changed exclusively by
a technical assistance centre authorized by the manufacturer, since special tools
are necessary
GENERAL WARNINGS
.
EN
111