Installation And Preparation - EUROM CoolStar 65 Livret D'instructions

A. Operation panel
B. Air outlet
C. Water reservoir
D. Handle
E. Vertical blinds
F. Air inlet
The COOLSTAR 65 evaporates water with heat that is removed from the room and
sends the cool, humid air back into the room: a process that can be compared to
wind blowing across water.
The COOLSTAR 65 has the following functions:
Ventilation (3 power settings)
-
Ventilation, cooling and humidifying (3 power settings)
-
Rotation
-

Installation and preparation

 Do not start using the air cooler until:
- all packaging is removed and placed away from children.
- all safety instructions have been observed.
The air cooler is placed on a stable flat surface.
-
• Check if the plug is NOT inserted in the socket.
 Turn the lock button (9) open and pull the water reservoir roughly 7 cm
backwards and fill with clean cold water; Fill the reservoir above the "MIN"- but
below the "MAX" level. Ensure that the plug does not get wet or fall into the
water tank. Never use the cooling function without sufficient water in the water
tank.
er reservoir clip
H. Electrical cable with plug
I. Water screen
J. Dust filter
27
G. W
at