Cleaning And Maintenance - EUROM 7000 Manuel D'utilisation

problems or the overheating recurs, even though there is no obvious assignable
cause, ask your supplier or a recognised electrician to check/repair the unit.

Cleaning and maintenance

Note! Before cleaning or carrying out maintenance work on the air conditioning
unit, always switch off and remove the plug from the socket! Regular cleaning is
vital in order to keep the unit in good working order!
Cleaning the housing
Use a soft, damp cloth to wipe the housing.
Never use aggressive cleaning products, petrol, detergent, chemically-impregnated
cloths or other cleaning solutions. These could damage the housing. Never spray
the unit and ensure that water never penetrates the device! Dry the unit with a soft
cloth.
Cleaning the filter
Clean the filter once every two weeks; a unit with a dirty filter will never work
properly. The filter can be found behind the air inlet grilles on the side. You can
easily open these grilles and remove the filter. Use a vacuum cleaner or gently beat
the filter to remove loose dust and dirt. Rinse the filter with tepid water (not hotter
than 40°C) with a mild, neutral cleaning product. Let the filter dry thoroughly in the
shade before replacing in the unit. Take care! Never use the air conditioning unit
without the filter!
End of season cleaning
If the device is to be stored for a long period, you must take the following
measures!
 Remove the condensed water. Run the unit for a few hours on fan function so
that the unit is completely dry inside.
 Then switch the air conditioning unit off and remove the plug from the socket.
 Clean the filter and reposition them or replace with a new one.
 Unscrew the waste pipe from the device in order to prevent damage.
 Pack the air conditioning unit in its original packaging or in a plastic bag and
place in a dry place for storage. Place a heavy object on the unit.
Trouble shooting
The unit does not start if I press the ON/OFF button
 Is the plug in the socket?
 Is the earth leakage circuit breaker engaged? No power?
 Is the water tank full? Empty it.
 The room temperature is lower than the set temperature; amend the set
temperature.
23