EUROM 7000 Manuel D'utilisation page 20

Cooling
 In order to use the cooling function, you do not need to connect the water
drainage hose. Place window panel in the window opening, see diagram. The
length of the window panel can be adjusted from 67.5 to 123 cm.
 Screw on the connector for the air conditioner on one end and the connector for
the window panel on the other end of the outlet hose.
 Slide the connector for the air conditioner into the appropriate slot on the rear of
the unit.
 Secure the other end of the outlet hose in the window panel opening so that it
can remove hot air outside.
 You can also hang the outlet hose out of an open window; this method is less
efficient however.
 Avoid bends or pinches in the pipe. These will lead to a build-up of damp, waste
air which can cause leaks, overheating or lead to the air conditioning unit
switching off.
 Don't forget about preventing access to burglars!
Operation
Operation panel
20
Remote control