Replacing The Chassis Parts/Rim Caps/Tyres; Mounting The Rear Spoiler And Connecting The Camera - Reely 1687734 Notice D'emploi

e) Replacing the chassis parts/rim caps/tyres
The hood, the cover for the driver's cabin and the side parts on the left and right-hand sides can be replaced without
tools. The vehicle comes with two complete sets of parts in different colours/designs.
It also comes with two different tyre sets and rim caps that can be changed without tools.
Replace the existing body parts/rim caps/tyres with the other set of parts.
A dummy headlight can be attached to the driver's cabin.
To remove the body parts, carefully unclip them from the vehicle.
To remove the rim caps, carefully turn them slightly to the right in a clockwise direction. To secure the rim
caps, attach them to the vehicle and then turn them left slightly in an anticlockwise direction.
The tyres are not glued to the wheel rims. The rim caps need to be removed before you can remove/replace
the rim caps.
The large rim caps are designed to be used with the large monster truck tyres. The small rim caps should
be used with the small monster truck tyres.
f) Mounting the rear spoiler and connecting the camera
The vehicle comes with two different rear spoilers, one of which is equipped with a camera. The rear spoiler can be
inserted into the holes and clicked into place on the back of the vehicle (behind the driver's cabin).
Switch the vehicle off before connecting the camera. Insert the camera connection plug into the corresponding socket
on the back of the vehicle. Do not use any force; the plug can only be inserted in one orientation.
The camera antenna can be inserted into a hole on the side of the rear spoiler.
42