Mains Part - Beurer SR BM1 Mode D'emploi

The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
• This device complies with European Standard EN60601-
1-2 and is subject to particular precautions with regard to
electromagnetic compatibility. Please note that portable and
mobile HF communication systems may interfere with this
unit. More details can be requested from the stated Custom-
er Services address or found at the end of the instructions
for use.
• This device corresponds to the EU Medical Devices Directive
93/42/EEC, the German Medical Devices Act (Medizinpro-
duktgesetz) and the standards EN 81060-1 (non-invasive
sphygmomanometers – Part 1: Methods for non-automated
measurement type General requirements). EN1060-3 (non-in-
vasive sphygmomanometers – Part 3: Supplementary re-
quirements for electro-mechanical blood pressure measuring
systems) and IEC80601-2-30 (Medical electrical equipment
– Part 2 – 30: Particular requirements for the basic safety and
essential performance of automated non-invasive sphygmo-
manometers).
• The accuracy of this blood pressure monitor has been care-
fully checked and developed with regard to a long useful
life. If using the device for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.
• We hereby guarantee that this product complies with
the European RED Directive 2014/53/EU. Please contact
kd@beurer.de to obtain detailed information, such as the CE
Declaration of Conformity.

11. Mains part

Model no. 8194047/02
Input 100 – 240 V AC, 50 – 60 Hz
Output 6 V, 600 mA, in conjunction with Beurer blood
pressure monitors only
Manufac- Ansmann AG
turer
Protection The device is double protected and has a
primary-side cutout switch which discon-
nects the device from the mains in case of
malfunction.
Ensure that you have removed the batteries
from the battery compartment before you use
the mains part.
Insulated/protection class 2
Housing and The housing of the mains part protects users
protective from touching live parts or parts that could be
covers live (for example with finger, needle, checking
hook).
Do not touch the patient and the output
connector of the AC/DC mains part at the
same time.
32