Kettler ELYX 7 Mode D'emploi Et Instructions D'entraînement page 44

Exercising and instruction manual
begins. If no exercise is performed and no key is pressed in this time then energy saving measu-
res will begin and the display will go into eco mode.
Under "Sound level" you can set the volume of the sounds used by the system, e.g. when you
reach the maximum pulse.
Under "Audio input" you can decide whether music can be played in whilst images or video
are being displayed.
Press "Back" to save the settings.
Display in standby mode
The machine will go into standby mode when the "ENTER" key is pressed.
Settings > time and date
You can adjust the date, time and time intervals here.
Pressing "back" accepts the settings.
20
GB
Settings > languages & units
Here you can decide what languages the menus will be shown in and whether the information
on speed and distance will be given in kilometres or miles.
"Set" lets you select one of the 5 languages: German, English, French, Spanish or Italian. You
will then be asked to set the country. This will determine the format of the date and time display.
Metric / imperial
Under metric / imperial you can select whether speed and distance will be displayed in kilome-
tres or miles.
Press "Back" to save the settings.
Settings > system
Under "Version" you will be able to see a description of the current firmware and underneath
you will see the available memory of the device and of any USB stick that is in the machine.
Here, you can reset the device to "factory settings" or update the firmware using a USB stick.
By pressing "restore" a new window will be opened which will ask if you would like to restore
all setting to the original "factory settings".