Cleaning The Machine Exterior; Changing The Boiler Water; Water Softening - Iberital Expression Pro Manuel D'installation

IBERITAL
New Iberital / Expression PRO
• LCD display screen (non-touchscreen):
Once the combination of buttons has been pressed on any control panel, the display will show:
At the end of the cleaning cycle the machine will return to the start MENU.
The cleaning cycle procedure can be carried out on all groups at the same time.
• TFT display screen (touchscreen):
In addition, we can perform this function by initiating the auto-wash function from the user menu (section
2.9.3.2.1). The system will keep us informed regarding the status of the process. Once completed, it will
notify us via a message, and we will have to confirm it in order to quit the option.

2.6.3. Cleaning the machine exterior

The machine's exterior panels should be cleaned with hot, soapy water (not boiling) and completely rinsed using a soft
cloth or sponge. Do not use abrasive products, as the panels could be scratched.

2.7. CHANGING THE BOILER WATER

• Disconnect the machine by setting the switch (12) to the off position.
• Open the steam knobs (7) until no more steam comes out. (Use the steam dispensers (9) with care, as
during normal operations they are extremely hot).
• Close the steam knobs (7).
• Open the drain valve (25) until the boiler is completely empty.
• Close the drain valve (25).
• Connect the machine, setting the switch (12) to position 1 (or switch (22) to ON) and wait until the
automatic control system completes the filling of the boiler from the mains water supply.
2.8. WATER SOFTENING (NOT INCLUDED)
The water softener removes lime from the water supply, preventing the formation of deposits and scale.
The water softener deteriorates with continuous use, and must be cleaned periodically or replaced. This process must
return the softener to its original condition. The presence of lime scale in the boiler due to an oversight of this process will
render any manufacturer's guarantee void. (The water softener is not included.)
76
Press (on any button pad of any group) the "non-stop" button, and the "2 espressos"
button at the same time; the LEDs for "1 coffee" and "2 espressos" will light up.
Rinsing
INSTALLATION AND OPERATION MANUAL