Safety Labels; Product Description - Mennekes AMTRON Compact 3,7 / 11 C2 Manuel D'utilisation Et D'installation

2.5 Safety labels

Safety labels that warn of hazardous situations are affixed
on some of the device components. If the instructions on
the safety labels are not complied with severe or fatal inju-
ries can occur.
Safety labels
Symbol
Danger – high voltage.
f Prior to performing tasks on the
device, ensure that it is de-ener-
gised.
Danger if the instructions in the
accompanying documents are not
complied with.
f Prior to performing tasks on the
device, read the accompanying
documents, particularly the instal-
lation and operating manual.
f Comply with the instructions on the safety labels.
f Clean contaminated safety labels to keep them legible.
When cleaning do not use aggressive cleaning agents.
f Replace safety labels that have been damaged or have
become unreadable.
f After replacement, affix the intended safety labels on
spare parts or accessories.
Meaning

3. Product description

Equipment features
„ Charging power up to 11 kW (three-phase)
„ No authorisation
„ MENNEKES ECU, Electronic Control Unit
„ Status information via LED information panel
„ Permanently connected charging cable
„ DC residual current monitoring > 6 mA
„ Terminals for the connection of an external switching
contact, such as for load management or authorisation
„ Temperature monitoring
„ Integrated cable hanger
„ Wired ready for connection
EN
5