Publicité
Les langues disponibles
Les langues disponibles
Installation to dehumidifier
To use the dehumidification function, connect the water drainage hose to the water
drainage point (high) (see picture). This hose should lead to a bucket or drain. The
hose should not run upwards! Your unit is now ready for use.
Installation to cool
In order to use the cooling function, you do not need to connect the water
drainage hose. Check that both sealing caps of the water drainage connections
are in place.
Install the window panel in the window.
Adjust the length of the window panel to the
width or height of the window and secure it
with the dowels. The length of the window
panel is adjustable from 67.5 to 123 cm.
Turn clockwise the connector
for the air conditioning on one
end and for the window panel
on the other end of the drain
hose.
44
Publicité
