Descaling; Descaling Procedure - Gaggia Milano CADORNA PRESTIGE Mode D'emploi

QUICK MILK CLEAN DEEP MILK CLEAN
DESCLING BREW GROUP CLEAN
ON/OFF my favourites HOME clean/setting
C L
A C
N
A E
L C
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 31

Descaling

Descaling procedure

Descaling needs to be carried out when the machine signals it.
Use only the Gaggia descaling solution designed to guarantee the machine's
excellent performance. The use of other products could damage the machine and
leave residue in the water. Failure to descale the machine will void the warranty.
1 Press the CLEAN/SETTING
on the display.
Press the " DESCALING " button, then press the START/STOP
-
2 Remove the drip tray and the coffee pucks container, empty them, and insert
START/STOP
them in the machine again.
3 Remove the water tank and empty it. Remove the INTENZA+ filter, if present.
4 Empty the entire bottle of Gaggia descaling solution into the water tank and fill
the tank with water up to the CALC CLEAN notch. Reinsert it in the machine.
5 Fill the milk carafe halfway with water and insert it in the machine.
6 Follow the instructions shown on the display to launch the descaling
procedure. This procedure lasts approximately 25 minutes and consists of
a descaling cycle and a rinse cycle, carried out with dispensing at regular
intervals.
7 Once the descaling cycle is complete, rinse the water tank, carafe and water
circuit, following the instructions shown on the display.
8 Replace the INTENZA+ filter into the water tank.
Note: it is possible to pause and resume the procedure at any time by pressing the
START/STOP button.
START/STOP
Warning: when the descaling procedure is active, the brew group cannot be
removed. Wait for the descaling process to end, then remove the brew group.
button and select the " CLEAN " button shown
clean/setting
English
31
button.
START/STOP
08/11/2019 13:01:36