Brewing Special Drinks; Descaling; Descaling Procedure - Gaggia Velasca Prestige RI8263 Mode D'emploi

Machine à espresso
Masquer les pouces Voir aussi pour Velasca Prestige RI8263:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Brewing special drinks

Descaling

CALC CLEAN

Descaling procedure

CALC
CLEAN
In the special drinks menu you can select hot water and baby cappuccino.
1 Press the SPECIAL DRINKS button to enter the menu. The display shows
the options for special drinks.
2 Press the UP/DOWN buttons to scroll through the options on the menu.
3 Press the OK button to confirm the desired beverage.
4 When you select HOT WATER, insert the hot water dispensing spout into
the machine and lock it into place. When you select cappuccino, milk froth
or baby cappuccino, insert the milk carafe into the machine.
You have to descale the machine when the display shows the CALC CLEAN
icon.
If you do not descale when the display shows the CALC CLEAN icon, the
machine may stop working properly. In this case, repairs are not covered by
the warranty.Never drink the water with descaling mixture that you pour into
the water tank or any water with residues that comes out of the machine
during the descaling procedure.The descaling procedure lasts approximately
30 minutes. Only use the Gaggia solution to descale the machine. The
Gaggia descaling solution is designed to ensure optimal performance of the
machine.
You can pause the descaling or rinsing cycle by pressing the ESC button.
The display will show the following icon. To continue the descaling or rinsing
cycle, press the OK button.
1 Remove and empty the drip tray. Slide the drip tray back into the
machine.
2 Remove the water filter from the water tank (if present).
3 Fill the milk carafe with fresh water up to the MIN level. Turn the
dispensing spout of the milk carafe to the 'I' position. Insert the milk carafe
into the machine.
4 Press the OK button.
-
The display shows the following icon to remind you have to place the
milk carafe in the machine.
5 The display shows the following icon to indicate that the machine enters
the descaling cycle. If you want to exit the descaling cycle, press the ESC
button.
6 Pour the entire bottle of Gaggia descaling solution (250ml) into the water
tank.
7 Add water to the descaling solution in the water tank up to the CALC
CLEAN indication.
English
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sup 047rg

Table des Matières