Using The Machine; Brewing Coffee With Beans; Brewing Coffee With Pre-Ground Coffee; Adjusting The Coffee Quantity - Gaggia Velasca Prestige RI8263 Mode D'emploi

Using the machine

Brewing coffee with beans

Brewing coffee with pre-ground coffee

Adjusting the coffee quantity

Setting the water hardness
1 To set the water hardness, press the MENU button, select menu and
scroll to select water hardness.
2 Press the OK button and select the water hardness in your area.
3 Press the OK button to confirm.
4 Press the ESC button to return to the main menu.
1 Adjust the coffee dispensing spout to suit the size of your cup.
2 Press the AROMA STRENGTH button to select the desired coffee
strength from 1-5 beans.
3 Press the ESPRESSO button to brew an espresso or press the ESPRESSO
LUNGO button to brew a coffee.
When you brew coffee with pre-ground coffee, use the measuring scoop in
the multifunctional tool supplied to put the correct dose in the pre-ground
coffee compartment. If you add more pre-ground coffee, the excess coffee
will end up in the coffee grounds drawer.
1 Open the lid of the pre-ground coffee compartment.
2 Pour one measuring scoop of pre-ground coffee into the compartment.
Caution: Do not put any other substance than pre-ground coffee in the
pre-ground coffee compartment, as this may damage the machine.
3 Place the lid back on the pre-ground coffee compartment.
4 Place a cup under the coffee dispensing spout.
5 Press the AROMA STRENGTH button to select pre-ground coffee.
6 Press the ESPRESSO button.
-
The machine starts brewing coffee.
Note: You can only brew one coffee beverage at a time with pre-ground
coffee.
1 Press and hold the ESPRESSO button or ESPRESSO LUNGO button until
the display shows the word MEMO.
2 When the cup contains the desired amount of coffee, press the OK
button to save the selected quantity.
English
15