Lubrication; Milk Carafe Quick Clean - Gaggia Velasca Prestige RI8263 Mode D'emploi

English
20

Lubrication

Milk carafe quick clean

8 The hook is not correctly positioned if it is still in bottommost position.
9 Slide the brew group back into the machine along the guiding rails on
the sides until it clicks into position. Then place the coffee residues drawer
back in the machine.
Lubricate the brew group after approximately 500 cups of coffee or once a
month.
1 Apply some lubricant around the shaft in the bottom of the brewing unit.
2 Apply lubricant to the rails on both sides, as shown in the illustration.
3 Slide the brew group back into the machine along the guiding rails on the
sides until it clicks into position. Then place the coffee residues drawer back
in the machine.
Between brewing milk varieties you can rinse the spout with hot water to
make sure every milk recipe is optimal.
1 Place a cup or container under the spout to collect the water.
2 Turn the milk dispensing spout to the 'I' position.
3 Press the CARAFE QUICK CLEAN button.
- The display reminds you have to insert the milk carafe, press the OK
button to confirm.
Note: Press the ESC button if you want to interrupt the milk carafe clean.