Monthly Full Milk Carafe Cleaning With Philips Milk Circuit Cleaner; Ordering Maintenance Products - Gaggia Velasca Prestige RI8263 Mode D'emploi

Monthly full milk carafe cleaning with Philips milk circuit
cleaner
FULL
CARAFE
CLEAN
MAX
CLEANING...

Ordering maintenance products

19 Pull the fitting outwards and separate it from the remaining part.
20 Clean all parts with lukewarm water.
21 Reassemble all parts following in reverse order.
You can purchase a Philips milk circuit cleaner from your local reseller or
from the authorized service centers.
Note: Before you start the procedure, make sure that the water tank is filled
up to the MAX level.
1 Press the MENU button.
2 Scroll through the menu till you see FULL CARAFE CLEAN.
3 Press the OK button.
4 Pour the content of the Philips milk circuit cleaner sachet into the milk
carafe and fill the milk carafe with water up to the maximum level.
5 Turn the milk dispensing spout to the 'I' position and insert the milk
carafe into the machine.
6 Place a large container under the milk dispensing spout.
7 Press the OK button to confirm.The display shows the following icon.
Note: You cannot interrupt the full milk carafe cleaning. If the full milk carafe
cleaning gets interrupted, you have to restart the cycle again.
8 The display reminds you have to fill the milk carafe with fresh water, fill
the milk carafe up till the max level. Press ok button to confirm.
The display shows the following icon.
9 The display shows a tick icon when the carafe rinsing cycle is finished.
press the ESC button to return to the main menu.
- Intenza+ water filter
- Gaggia descaling solution
-
Philips milk circuit cleaner
English
23