The Display; First Installation - Gaggia Velasca Prestige RI8263 Mode D'emploi

English
12

The display

ESPRESSO
CAPPUCCINO

First installation

Some buttons can be used to navigate through the menus:
- ESPRESSO button = ESC button: you can press this button to return to
the main menu. The ESC button takes you back one level. You may have
to press the ESC button several times to get back to the main menu.
- AROMA STRENGTH button = OK button: you can press this button to
select, confirm or stop a function.
- CAPPUCCINO button = UP button: press this button to scroll up through
the display menu.
- SPECIAL DRINKS button = DOWN button: press this button to scroll
down through the display menu.
1 Slide the drip tray with drip tray cover into the machine.
2 Remove the water tank.
3 Fill the water tank to the MAX level with fresh water.
4 Fill the coffee bean hopper with coffee beans.
5 Insert the small plug into the socket located on the back of the machine.
Insert the power plug into the electrical outlet.
Note: The display reminds you have to insert the hot water dispensing
spout. If not present, press on both sides of the hot water dispensing spout
and insert it into the machine until you hear a click.
6 Place a container under the hot water and coffee dispensing spouts.
7 Press the STANDBY button.
8 Press the OK button to start the automatic circuit priming cycle.
The machine performs an automatic rinsing cycle.
9 Remove the water tank from the machine, empty it.
10 Fill the water tank with fresh water and place it back into the machine.
11 Continue with the next step: the manual rinsing cycle.