Replacing The Water Filter; Measuring The Water Hardness - Gaggia Velasca Prestige RI8263 Mode D'emploi

English
14
ON
OFF

Replacing the water filter

ON
OFF
RESET

Measuring the water hardness

1 2
3
4
numbers of red squares
1
2
3
4
9 Press the UP button to select 'ON' and press the OK button to confirm.
10 Press the ESC button. The filter and machine are now ready for use.
The display shows the following icon to indicate the water filter needs to be
replaced.
1 Replace the filter as described in section 'Installing the water filter'.
2 Press the MENU button and press the UP/DOWN button to scroll trough
the options on the menu until the following icon is displayed.
3 Select the RESET option and press the OK button to confirm.
4 Press the ESC button to exit. If the filter is already installed and you want
to remove it and not replace it, choose OFF
To be able to adjust the machine settings to the water in your region, please
measure the water hardness with the water hardness strip supplied.
1 Immerse the water hardness test strip (supplied with the machine) in
fresh water for 1 second.
2 Remove the water hardness strip and and wait for 1 minute.
3 Check how many squares have changed into the red color and check the
water hardness in below table.
value to be set
1
2
3
4
water hardness
very soft water
soft water
hard water
very hard water