Lubricating The Brew Group - Gaggia Milano CADORNA PRESTIGE Mode D'emploi

English
30
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 30

Lubricating the brew group

In order to ensure the perfect performance of the machine, it is necessary
to lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water (see the "Cleaning
the brew group under running water" chapter).
3 Apply a thin layer of the lubricant provided around the inserting pin on the
lower part of the brew group.
4 Apply a thin layer of lubricant to the guides, on both sides (see figure).
5 Reinsert the brew group (see the "Reinserting the brew group" chapter).
Note: you can use the lubricant tube multiple times.
Number of beverages prepared
daily
1-5
6-10
>10
Frequency of
lubrication
Every 4 months
Every 2 months
Every month
08/11/2019 13:01:35