Lubricating The Brew Group - Gaggia Milano MAGENTA MILK Mode D'emploi

4219-465-02851 MAN. GAG. MAGENTA Milk 120V EN-FR Rev 01.indd 29

Lubricating the brew group

In order to ensure the perfect performance of the machine, it is necessary
to lubricate the brew group. Refer to the following table for the frequency of
lubrication.
Frequency of use
Low
Regular
High
1 Turn off the appliance and disconnect the power cord.
2 Remove the brew group and rinse it using lukewarm water - see the "Cleaning
the brew group under running water" chapter.
3 Apply a thin layer of the lubricant provided around the insertion pin on the
lower part of the brew group.
4 Apply a thin layer of lubricant to the guides, on both sides (see figure).
5 Reinsert the brew group - see the "Reinserting the brew group" chapter.
Note: you can use the lubricant tube multiple times.
Number of beverages prepared
daily
1-5
6-10
>10
English
29
Lubrication
frequency
Every 4 months
Every 2 months
Every month
21/01/2021 12:05:40