4219-465-02851 MAN. GAG. MAGENTA Milk 120V EN-FR Rev 01.indd 31
What to do if the descaling process is interrupted
You can exit the descaling procedure by keeping the ON/OFF
control panel, pressed for a few seconds. If the descaling procedure is interrupted
before its completion, proceed as follows:
1
Empty the water tank and wash it thoroughly.
2
Fill the water tank with running water up to the CALC CLEAN level mark, then
switch the machine back on. The machine will warm up and perform an
automatic rinse cycle.
3
Before preparing any beverages, carry out a manual rinse cycle as described in
the dedicated chapter.
Note: if the procedure has not been completed, it will be necessary to carry out
another descaling procedure as soon as possible.
Other settings
By pressing the CLEAN/SET
you can reset or modify some of the machine parameters including:
Language.
-
Water filter.
-
Stand-by Time.
-
Units.
-
Water hardness.
-
Beverage counter.
-
Button sound
-
Factory settings.
-
Language
When the language setting icon is selected, the list of available languages will be
displayed.
Available languages
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH
PORTUGUESE
DUTCH
button and selecting "SETTINGS" on the display,
clean/setting
DANISH
GREEK
POLISH
RUSSIAN
ROMANIAN
HUNGARIAN
BULGARIAN
English
31
button on the
ON/OFF
CZECH
SLOVAKE
LITHUANIAN
JAPANESE
KOREAN
TRADITIONAL CHINESE
SIMPLIFIED CHINESE
21/01/2021 12:05:45