Reinserting The Brew Group - Gaggia Milano MAGENTA MILK Mode D'emploi

4219-465-02851 MAN. GAG. MAGENTA Milk 120V EN-FR Rev 01.indd 27
5 Remove the coffee residues drawer.
Cleaning the brew group under running water
1 Clean the coffee outlet duct thoroughly with a spoon handle or with another
round-tipped kitchen utensil.
2 Rinse the brew group and the coffee residues drawer thoroughly with
lukewarm water. Carefully wash the upper filter.
3 Let the brew group air dry.
Note: to avoid the build-up of fibres in its interior, do not dry the brew group with
cloth.

Reinserting the brew group

1 Before placing the brew group back into the machine, make sure that the two
yellow reference marks on the side match. If this is not the case, perform the
following step:
Make sure that the lever is in contact with the base of the brew group.
English
27
21/01/2021 12:05:36