Reinserting The Brew Group - Gaggia Milano NAVIGLIO MILK Mode D'emploi

ENGLISH
28
MAN. GAG. NAVIGLIO MILK USA EN.indd 28
4 To remove the brew group, press the «PUSH» button and pull it by the handle.
Cleaning the brew group under running water
1 Clean the coffee outlet duct thoroughly with a spoon handle or with another
round-tipped kitchen utensil.
2 Thoroughly rinse the brew group using lukewarm water. Carefully wash the
upper filter.
3 Let the brew group air dry.
Note: to avoid the build-up of fibres in its interior, do not dry the brew group with
cloth.

Reinserting the brew group

1 Before reinserting the brew group into the machine, ensure that the two yellow
reference indicators on the side coincide. If this is not the case, perform the
following step:
Make sure that the lever comes into contact with the base of the brew group.
05/11/2019 11:37:59